Tire Repair | Tire Mounting Paste 11 Lb Pail

Description

Tire Mounting Paste
Description
11 lb Pail
Technical Data
Consistency: creamy, solid
pH-value: 5.5 – 6.0
Processing temperature: +5?F to +104?F
Flame point: >212?F
Density at 68?F: 1.04 g/cm3
Shelf life: 24 months
Possible material combinations: rubber/steel, rubber/light metal, rubber plastic
For fitting of car, truck  and motorcycle tires.
Features
Excellent lubrication
– Low force required for quick fitting of the tire
– Reduced material consumption
– Reduced machine wear
– Gentle on tyre bead and rim
– Better centering of the tire on the rim
Short aeration time
– Non-positive bonding between tire and rim shortly after fitting
– Reduces complaints and consequential costs for possible re-balancing
Tire and rim care
– Keeps tire rubber supple and assures permanent sealing between rim and tire bead
– Fights rust (non-corrosive)
– Prevents sticking of the tire to the rim pH-neutral
– No aggressive effect on tire rubber or rim
Suitable for Run-flat tires
– Suitable for most current tire generation
Physiologically safe
Free of harmful solvents
Keeps tyre bead supple and operable during storage in summer/winter
VOC and Silicone Free
50 State Compliant
Instructions for use
Use with brush or sponge.
Tire Removal
Tire Mounting
Prior to fitting a new tire, clean the rim and of all residual fitting paste in the area of the tire bead. We recommend using brake cleaner for this purpose. Remove pos­sible rust with a wire brush. These preparations will enhance the effec­tive­ness of the WURTH Tire Fitting Paste.  Apply a thin coat of tire mounting paste on the tire bead and the rim and fit the tire using the appropriate tire ­fitting equipment. Expert fitting of the tire is a basic requirement to achieve the best pos­sible running characteristics of the tire.